
Project Details
- Completed: November 3, 2026
Our team at Intensa Dry Mold & Water Restoration just finished a full mold remediation in an older Richardson, TX home, with mold hiding under four rooms of flooring. It all traced back to water, which is why fast emergency water damage restoration matters. Mold doesn’t need a flood. It just needs time.
We’re a family owned, IICRC certified crew from Plano, and we hold a Texas mold certification. Here’s how this one went.
What Caused the Mold in This Richardson Home?
A slow kitchen leak and a damp crawl space did most of the damage. Water under the sink had been seeping into the old wood subfloor for months, while the crawl space below added its own humidity. By the time the family noticed a musty smell, mold had spread well past the kitchen.
Elnard was at the house that same afternoon. When we lifted a corner of the flooring, the planks underneath were speckled black.
Lots of older DFW homes sit on pier and beam foundations, and a damp crawl space turns the underside of your floor into a mold buffet.
What We Found
- Mold on the wood subfloor in four rooms
- Mold on the back of lower drywall
- High moisture under the kitchen sink cabinet
- Mold on the crawl space joists and subfloor
How Did We Remove the Mold, Room by Room?
Mold remediation means removing what can’t be saved and deep cleaning what can. Here, that meant tearing out flooring in four rooms, cutting out moldy drywall, and treating the wood subfloor and crawl space framing. Our crew worked inside containment the whole time, in suits and respirators.
Protecting the Home First
Before a single board came up, we wrapped the furniture, packed the kitchen, and sent the living room to storage on a moving truck. Then we built containment with plastic barriers and HEPA air scrubbers that trap spores before they reach clean rooms. The IICRC S520 mold remediation standard calls for it, and we never skip it.
An Old House Surprise
Some materials here contained asbestos. That’s common in older houses, so those areas got their own sealed containment and abatement under licensed asbestos protocols before we went any further. Nobody cuts corners with asbestos.
Home built before the 1980s? Get flooring and drywall tested before any DIY demo.
What we found and how we protected the home:
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
The Kitchen Took the Hardest Hit
We removed about 24 square feet of drywall behind the sink and 5 linear feet of cabinet base. The exposed plumbing showed exactly where water had been sneaking out, a textbook case of slow kitchen water damage. We saw a similar story with another hidden kitchen sink leak.
Living Room, Dining Room, and Hallway
Under the vinyl, the plank subfloor was spotted with mold almost wall to wall. We bagged the debris, sanded every board, and HEPA vacuumed right behind the sander. Mold on a subfloor is a classic sign of long term water damage under floors.
Down in the Crawl Space
Then came the crawl space, which is exactly as glamorous as it sounds. Our crew spent hours on their backs, wire brushing about 750 square feet of joists and subfloor, then sealing the wood with an antimicrobial coating. Somebody has to do it right.
Demo and containment, room by room:
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
How Did We Know the Home Was Mold Free?
We call a job done when the numbers and the inspection say so, not when it just looks clean. After cleaning, we sealed the subfloors with a white mold resistant coating and kept the air scrubbers running. Then we rechecked moisture to confirm the wood was dry.
Texas requires an independent licensed mold assessor to clear the work, and this home passed on the first try. The EPA’s mold and moisture guidance sums it up: control the moisture, and you control the mold.
We even wiped down every air scrubber before it left. Spores are hitchhikers, and we don’t give rides.
Next up are new floors and drywall, which our reconstruction services in Richardson can handle.
Sanding, sealing, and the finish line:
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
What Did the Family Say About Working With Us?
The family told us communication made the biggest difference. They had a lot of questions, and we answered every one. We kept them updated from the first walkthrough to the final inspection, and passing clearance on the first try was the cherry on top.
Their review is below, or you can see their full review on Google.

Mold Remediation FAQs for Richardson Homeowners
These are the mold questions we hear most from homeowners around Richardson and the rest of DFW. Don’t see yours? Ask us during a free inspection. We’ll explain what we find and what it means for your home, in plain English.
How fast can mold grow after a leak?
Mold can start growing within 24 to 48 hours after materials get wet. Our guide to preventing mold after water damage covers what to do first.
How do I keep mold from coming back?
Fix the water, because mold can’t grow without it. Repair small leaks fast, keep crawl spaces dry, and book professional water leak detection if you suspect a hidden leak.
Musty smell? Dark spots? We’ll inspect for free anywhere in DFW, 24/7, and work directly with your insurance company.
What happens when you call?
- We set up a visit, often the same day.
- We inspect with moisture meters and walk you through everything we find, step by step.
- You get a clear plan and help with your insurance claim.
Dealing With Property Damage?
This is the kind of job we handle every week. Get a fast, local response.



























